[Jan-2022] HP HPE6-A70 Official Cert Guide PDF
Exam HPE6-A70: Aruba Certified Mobility Associate Exam - RealVCE
Understanding functional and technical aspects of Aruba Certified Mobility Associate (HP HPE6-A70) Professional Exam Object Management
The following will be discussed in HP HPE6-A70 dumps:
- Given a customer use case, differentiate and position HPE products for the following elements of the solution compute storage networking hyperconverged software defined and cloud services
- Update a proposed solution based on availability, supply constraints, additional or updated requirements, and/or cost
- Identify and use the appropriate tools to architect and configure the solution
- Demonstrate, deploy, and manage an HPE Proof of Concept (PoC)
- Given a set of customer requirements, select the appropriate HPE and 3rd party products and services for the solution
- Identify key customer business, technical and system requirements and outcomes
- Distinguish the scalability limits in the Aruba controller models, and given a scenario with customer specifications decide which model is most suitable
- Describe, contrast and differentiate compute, storage and network architectures and how to select and optimize for specific customer workloads
- Define and distinguish between AP Modes (CAP, SA, AM, mesh point, mesh portal, IAP, RAP)
- Identify and position HPE solutions and workload offerings with the alliance partner ecosystem components to the appropriate customer use case
- Document customer intent and solution design
- Recognize and distinguish automatic RF management capabilities and characteristics
NEW QUESTION 14
What is a reason for a company to choose to deploy an Aruba 7024 Mobility Controller (MC) rather than an Aruba 7010 MC?
- A. to support 802.11ac Aps rather than only 802.11n APs
- B. to support more wireless users
- C. to support more POE devices directly connected to the MC
- D. to support a faster firewall throughput rate
Answer: C
NEW QUESTION 15
A network administrator reduces an AP radio transmit power from 18 dBm to 15 dBm. This is a loss of 3 dBms.
What is the current power as a percentage of the original power?
- A. 10%
- B. 50%
- C. 83%
- D. 33%
Answer: B
NEW QUESTION 16
A company deploys an Aruba wireless solution for the first time. In which deployment is clustering supported?
- A. deployment in 7000 Series standalone mode
- B. deployment as a standalone VMC
- C. deployment in master-local mode
- D. deployment as Mobility Masters (MMs)
Answer: D
NEW QUESTION 17
An Aruba solution runs ArubaOS 8 and uses a mobility master architecture. Which feature can network administrators use to balance wireless devices across APs on different channels?
- A. Client Match
- B. AirMatch
- C. ARM
- D. AppRF
Answer: A
NEW QUESTION 18
What is the difference between WPA and WPA2 encryption?
- A. WPA encryption uses TKIP by default, and WPA2 encryption uses AES by default.
- B. WPA encryption works only with preshared key (PSK) authentication, and WPA2 encryption works with both PSK and 802.1X.
- C. WPA encryption uses symmetric keys, and WPA2 encryption uses asymmetric keys.
- D. WPA encryption acts at Layer 3, and WPA2 encryption acts at Layer 2.
Answer: A
NEW QUESTION 19
A company has a Mobility Master (MM)-based solution. A network administrator wants to monitor data transfer speed ranges of all currently connected clients.
Which dashboard page in the MM interface should the administrator visit?
- A. Performance
- B. Security
- C. Network
- D. Traffic Analysis
Answer: D
NEW QUESTION 20
What is one difference between how administrators can use the Mobility Master (MM) Interface as compared to the AirWave Management Platform?
- A. MM shows trends for the past several minutes, while AirWave shows historical data.
- B. AirWave shows the current signal level for the client connection, while MM does not show RF statistics.
- C. AirWave shows trends for the past several minutes, while MM shows historical data.
- D. MM shows user and role information associated with clients, while AirWave does not.
Answer: A
NEW QUESTION 21
Refer to the exhibit.
What is a valid way to help the APs discover devices that can control them?
- A. Enable CPSec, and ensure the Mobility Master (MM) and Mobility Controllers (MCs) trust the Aruba certificates installed on the APs at the factory.
- B. Map the Mobility Controller (MC) IP addresses to the aruba-master name on the network DNS server.
- C. Specify the Mobility Master (MM) IP address in DHCP option 43 on the network DHCP server.
- D. Set up an Aruba Central subscription, and ensure that APs can reach the Internet.
Answer: B
NEW QUESTION 22
A network administrator creates the role employees and adds the rule to it:
user any any permit
The first several wireless clients assigned to the employees role are assigned IP addresses in the 10.10.10.0/24 subnet. Several other wireless clients with the employees role are then assigned IP addresses in the
10.10.20.0/24.
When the Aruba firewall matches traffic from these clients to the user any any permit rule, what does it do?
- A. It permits traffic from wireless clients in both the 10.10.10.0/24 and 10.10.20.0/24 subnet as long as the packet has a source IP.
- B. It drops traffic from wireless clients in both the 10.10.0/24 subnet and 10.10.20.0/24 subnet.
- C. It permits the traffic from wireless clients in the 10.10.20.0/24 subnet, but drops the traffic from wireless clients in the 10.10.10.0/24 subnet.
- D. It permits the traffic from wireless clients in the 10.10.0/24 subnet, but drops the traffic from wireless clients in the 10.10.20.0/24 subnet.
Answer: A
NEW QUESTION 23
An Aruba Remote AP (RAP) operates in split-tunnel mode. How does the AP forward traffic?
- A. It sends all employee and control traffic in a GRE tunnel to a central Mobility Controller (MC), and it bridges all guest traffic locally.
- B. It sends all user traffic in a GRE tunnel to a central Mobility Controller (MC), and it sends control traffic in an IPsec tunnel to the controller.
- C. It sends traffic designed to the corporate network in an IPsec tunnel to a central Mobility Controller (MC), and it bridges other traffic locally.
- D. It sends user and control traffic in two separate IPsec tunnels to the Mobility Controller (MC).
Answer: C
NEW QUESTION 24
A network administrator monitors an Aruba Mobility Controller with Aruba AirWave and sees the configuration status is Error. What should the administrator conclude?
- A. AirWave has a communication issue with the controller and cannot check the configuration.
- B. AirWave checks the controller configuration and detects a syntax error.
- C. AirWave determines that the controller configuration does not match the template for its group.
- D. AirWave detects a mismatch with the controller configuration and software version.
Answer: A
NEW QUESTION 25
A network administrator has installed PEF licenses in the global pool of a Mobility Master (MM) solution.
When the administrator tries to configure roles and policies, an error indicates that the PEF licenses must be installed.
What should the administrator do to correct this issue?
- A. Enable Building 1 as a local license pool.
- B. Ensure the PEF licenses were installed at the Managed Network and not at the MM level.
- C. Enable the PEF feature in the Global Usage window.
- D. Activate the PEF licenses through an Aruba Activate account.
Answer: B
NEW QUESTION 26
A customer has a large campus that requires 400 Aruba 335 APs to support a total of 10,000 wireless users and 12Gbps of traffic. Although the customer wants two controllers for redundancy, each controller must be able to support all of the APs and users on its own.
Which Aruba Mobility Controller models meet the customer requirements and DO NOT unnecessarily exceed them?
- A. Aruba 7210 controllers
- B. Aruba 7240 controllers
- C. Aruba 7024 controllers
- D. Aruba 7030 controllers
Answer: A
NEW QUESTION 27
Refer to the exhibits.
Exhibit 1
Exhibit 2
A company has an Aruba Mobility Master (MM)-based solution and needs a new WLAN for the corporate campus. A network administrator completes the creation of this WLAN, as shown in Exhibit 1. When the administrator tries to test a connection to the WLAN in various locations, the WLAN sometimes shows up in the list of WLANs on the client but sometimes does not. The administrator can see the WLAN in the list, as shown in Exhibit 2.
What is the error?
- A. The configuration is not deployed to the Mobility Controller (MC).
- B. The WLAN is configured as a hidden SSID.
- C. The Mobility Master (MM) does not have an active PEFNG license.
- D. The WLAN is configured at a lower level in the Managed Network hierarchy.
Answer: A
NEW QUESTION 28
Refer to the exhibit.
Which role must AP 1 play?
- A. Remote AP (RAP)
- B. Mesh Portal AP
- C. Instant AP (IAP)
- D. Mesh Point AP
Answer: B
NEW QUESTION 29
Refer to the exhibit.
The alias in the rule shown in the exhibit is network 10.1.1.0/24.
A wireless client is assigned IP address 10.1.2.10/24 and the "admins" role. The wireless client at 10.1.2.10 attempts to initiate a Web session with a server at 10.1.1.2. A wired client at 10.1.1.3 attempts to initiate an SSH session with the wireless client at 10.1.2.10.
How does the Aruba firewall handle these attempts?
- A. The firewall permits the traffic from the wireless client and also permits the return traffic from the server. The firewall permits the traffic from the wired client and also permits the return traffic from the wireless client.
- B. The firewall permits the traffic from the wireless client and also permits the return traffic from the server. The firewall drops the traffic from the wired client.
- C. The firewall drops the traffic from the wireless client. The firewall drops the traffic from the wired client.
- D. The firewall permits the traffic from the wireless client, but drops the return traffic from the server. The firewall drops the traffic from the wireless client.
Answer: B
NEW QUESTION 30
How can network administrator provide high availability for APs deployed in an Aruba Mobility Master (MM)- based architecture?
- A. Configure APs to convert to controller-less Instant AP mode during controller failure.
- B. Establish clusters of Mobility Controllers (MCs).
- C. Configure MM to provide backup AP tunnel termination in case of controller failure.
- D. Deploy all licenses locally to APs, so that they can continue to function if they lose contact with their controller.
Answer: B
NEW QUESTION 31
A company has an Aruba Mobility Master (MM)-based solution. Under which circumstance will an AP radio change channel without the use of the Mobility Master (MM)?
- A. when the Client Match rules indicate that nearby clients do not support the current channel
- B. when the Mobility Controller (MC) detects a rogue AP on the channel
- C. when the AP detects a large amount of interference on its channel
- D. when the MM detects that a different channel has significant better quality
Answer: C
NEW QUESTION 32
Refer to the exhibits.
Exhibit 1
Exhibit 2
A company has an Aruba solution. Client 1 is assigned to the users1 role, and client 2 is assigned to the users2 role. The exhibits show current firewall rules for those roles. The network1 alias used to be 10.1.1.0/24, but the network administrator now changes the network1 alias to 172.16.1.0/24. Client 1 and Client 2 both send a packet destined to 172.16.1.10.
How does the firewall handle these packets?
- A. It permits the packet from Client 1 and denies the packet from Client 2.
- B. It denies the packet from Client 1 and permits the packet from Client 2.
- C. It denies both packets.
- D. It permits both packets.
Answer: A
NEW QUESTION 33
What is an example of a Layer2 wireless threat that a wireless intrusion detection system (WIDS) should detect?
- A. Bluetooth interference
- B. 802.11 association floods
- C. spyware
- D. RF jamming
Answer: B
NEW QUESTION 34
A network administrator wants to assign an authentication server group to the WPA2-Enterprise WLAN.
Which profile should the administrator modify?
- A. AAA
- B. Virtual AP
- C. SSID
- D. L2 Authentication
Answer: A
NEW QUESTION 35
Refer to the exhibit.
What describes the behavior for this WLAN?
- A. APs in the default group broadcast the SSID. Clients can connect to the WLAN on APs in any group.
- B. No APs broadcast the SSID. Clients can connect to the WLAN on APs in the default group only.
- C. No APs broadcast the SSID. Clients cannot connect to the WLAN until administrators activate it.
- D. APs in the default group broadcast the SSID. Clients can connect to the WLAN on APs in the default group only.
Answer: D
NEW QUESTION 36
......
Free HPE6-A70 Exam Dumps to Improve Exam Score: https://examcollection.realvce.com/HPE6-A70-original-questions.html