[Apr 08, 2024] Latest 1Y0-440 PDF Dumps & Real Tests Free Updated Today
1Y0-440 Dumps With 100% Verified Q&As - Pass Guarantee or Full Refund
Citrix 1Y0-440 certification exam is a valuable credential for professionals who want to advance their career in the networking field. Architecting a Citrix Networking Solution certification demonstrates that the candidate has the skills and knowledge required to design, deploy, and manage Citrix networking solutions, which are in high demand in the industry.
NEW QUESTION # 70
Scenario: A Citrix Architect needs to deploy Single Sign-on form-based authentication through Citrix ADC for Outlook Web Access (OWA) 2013 for the users of the domain workspacelab com The Single Sign-on (SSO) must be performed based on sAMAccountName.
Which SSO action can the architect use to meet this requirement?
- A. add tm formSSOAction OWA_Form_SSO_SSOPro -actionURL "/owa/auth owa" -userField usemame -passwdField password -ssoSuccessRule "http RES SET_COOKIE COOKIE(V"cadataV,)VALUE(V,cadata\") LENGTH GT(70)M -responsesize 15000000 -submrtMethod POST
- B. add tm formSSOAction OWA_Form_SSO_SSOPro -actionURL "/owa/owa.aspx" -userField usemame -passwdField password -ssoSuccessRule "http RES SET_COOKIE COOKIE(\"cadata\") VALUE(\ncadata\") LENGTH.GT(70)" -responsesize 150 -submrtMethod POST
- C. add tm formSSOAction OWA_Form_SSO_SSOPro -actionURL "/owa/auth.owa" -userField user -passwdField password -ssoSuccessRule "http RES SET_COOKIE COOKIEC'cadataV) VALUE(\"cadata\").LENGTH.GT(70)" -responsesize 15000000 -submrtMethod GET
- D. add tm formSSOAction OWA_Form_SSO_SSOPro -actionURL "/owa" -userField username -passwdField password -ssoSuccessRule "http RES SET_COOKIE COOKIE(V,cadata\M).VALUE(\Mcadata\").LENGTH.GT(70)M -responsesize 15000000 -submrtMethod POST
Answer: A
Explanation:
add tm formSSOAction OWA_Form_SSO_SSOPro -actionURL "/owa/auth.owa" -userField username -passwdField password -ssoSuccessRule "http.RES.SET_COOKIE.COOKIE(\"cadata\").VALUE(\"cadata\").LENGTH.GT(70" -responsesize 15000 -submitMethod POST
NEW QUESTION # 71
Which two features are supported on LbaaSV1? (Choose two.)
- A. Cookie Insertion
- B. Certificate Bundle
- C. Layer 4 Load balancing
- D. Layer 7 Load Balancing
- E. Server name Indicator
Answer: C,E
Explanation:
Explanation
NEW QUESTION # 72
Scenario: The Workspacelab team has implemented Citrix ADC high availability pair and Citrix ADC Management and Analytics System (Citrix Application Delivery Management). The Citrix Application Delivery Management was configured by a Citrix Architect to monitor and manage these devices. The Workspacelab team wants to load balance their Microsoft SharePoint servers on the Citrix ADC and needs the process to be streamlined and administered using Citrix Application Delivery Management.
The following requirements were discussed during the meeting:
The Microsoft SharePoint server should be optimized, load balanced, and secured in the network and should be deployed using Citrix Application Delivery Management.
All the configurations should be yenned before getting pushed to the Citrix Application Delivery Management.
Which feature should the architect use to configure the Microsoft SharePoint server using Citrix Application Delivery Management?
- A. Jobs Analytics
- B. Configuration
- C. Orchestration
- D. StyleBooks
Answer: D
NEW QUESTION # 73
Which encoding type can a Citrix Architect use to encode the StyleBook content, when importing the StyleBook configuration under source attribute?
- A. Hex
- B. Unicode
- C. URL
- D. base64
Answer: D
Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/netscaler-mas/12/stylebooks/how-to-use-api-to-create-configuration- from-stylebooks/import-custom-stylebooks.html
NEW QUESTION # 74
Which two NetScaler cookies indicate the validity of the Authentication, Authorization and Accounting (AAA) session for users? (Choose two.)
- A. NSC_TMAA
- B. NSC_TMAS
- C. NSC_WT
- D. NSC_AAAC
Answer: A,B
Explanation:
Explanation/Reference: https://support.citrix.com/article/CTX202900
NEW QUESTION # 75
Scenario: A Citrix Architect has deployed an authentication setup with a ShareFile load-balancing virtual server. The NetScaler is configured as the Service Provider and Portalguard server is utilized as the SAML Identity Provider. While performing the functional testing, the architect finds that after the users enter their credentials on the logon page provided by Portalguard, they get redirected back to the Netscaler Gateway page at uri /cgi/samlauth/ and receive the following error.
The events in the /var/log/ns.log at the time of this issue are as follows:
What should the architect change in the SAML action to resolve this issue?
- A. The Digest Method to SHA 256
- B. The Digest Method to SHA 1
- C. Signature Algorithm to SHA 1
- D. Signature Algorithm to SHA 256
Answer: B
NEW QUESTION # 76
Scenario: A Citrix Architect needs to design a new multi-datacenter NetScaler deployment. The customer wants NetScaler to provide access to various backend resources by using Global Server Load Balancing (GSLB) in an Active-Active deployment.
Click the Exhibit button to view additional requirements identified by the architect.
Which GSLB algorithm or method should the architect use for the deployment, based on the stated requirements?
- A. Source IP hash
- B. Dynamic round trip time (RTT)
- C. Static proximity
- D. Least packets
- E. least connection
- F. Least response time
Answer: F
NEW QUESTION # 77
Scenario: A Citrix Architect has implemented two high availability pairs of MPX 5500 and MPX 11500 devices respectively with 12.0.53.13 nc version. The Citrix ADC devices are set up to handle Citrix Gateway. Load Balancing. Application Firewall, and Content Switching. The Workspacelab infrastructure is set up to be monitored with Citrix Application Delivery Management version 12.0.53.13 nc by the Workspacelab administrators. The Workspacelab team wants to implement one more pair(s) of Citrix ADC MPX 7500 devices with version 12.0.53.13 nc.
The Citrix consulting team has assigned the task to implement these Citrix ADC devices in the infrastructure and set them up to be monitored and managed by Citrix ADC Management and Analytics {Citrix Application Delivery Management).
The following are the requirements that were discussed during the project initiation call:
Citrix Application Delivery Management should be configured to get the infrastructure information under sections such as HDX Insight, WEB Insight, and Security Insight.
Configuration on the new MPX devices should be identical to that of MPX 11500 devices.
Configuration changes after the deployment and initial setup should be optimized using Citrix Application Delivery Management.
Citrix Application Delivery Management should be utilized to configure templates that can be utilized by the Workspacelab team in future deployments.
As per the requirement from the Workspacelab team, Citrix Application Delivery Management should store the audited data for only 15 days.
However, the architect is NOT able to view any Information under Analytics. What should the architect do to fix this issue?
- A. Use nsconfig from MPX 11500 devices and copy the same config to MPX 7500 devices.
- B. Use configuration jobs to replicate the entire configuration from MPX 11500 Instance to MPX 7500 devices.
- C. Use Public Stylebooks and templates to configure the new MPX 11500 devices.
- D. Use Inbuilt Stylebooks and templates to configure the new MPX 11500 devices.
Answer: B
NEW QUESTION # 78
Which parameter must a Citrix Architect configure to ensure that HDX Proxy Connection terminates upon AAA Session TimeOut?
- A. ICA session timeout in Citrix ADC Gateway Session Profile.
- B. ICA session timeout in VPN parameters
- C. Connection timeout(mins) in Citrix ADC gateway Session Profile.
- D. Connection timeout(mins) in VPN Parameters
Answer: A
NEW QUESTION # 79
Which request can a Citrix Architect utilize to create a NITRO API command to add a NetScaler appliance with NSIP address 10.102.29.60 to the cluster?
- A. Option C
- B. Option B
- C. Option A
- D. Option D
Answer: C
NEW QUESTION # 80
Scenario: A Citrix Architect needs to assess a Citrix Gateway deployment that was recently completed by a customer and is currently in pre-production testing The Citrix Gateway needs to use ICA proxy to provide access to a Citrix Virtual Apps and Citrix Virtual Desktops environment. During the assessment, the customer informs the architect that users are NOT able to launch published resources using the Gateway virtual server.
Click the Exhibit button to view the troubleshooting details collected by the customer.
Which two reasons could cause this issue? (Choose two)
- A. There are no backend Virtual Delivery Agent (VDA) machines available to host the selected published resource
- B. The Secure Ticket Authority (STA) servers have NOT been configured in the Citrix Gateway settings
- C. The required ports have NOT been opened on the firewall between the Citrix Gateway and the Virtual Delivery Agent machines
- D. The StoreFront URL configured in the Citrix Gateway session profile is NOT correct.
- E. The two-factor authentication is NOT configured on the Citrix Gateway
Answer: B,C
NEW QUESTION # 81
Scenario: A Citrix Engineer is asked by management at the workspacelab organization to review their existing Citrix ADC Configurations and make the necessary upgrades. The architect recommends small changes to the pre-existing Citrix ADC configuration. Currently, the Citrix ADC MPX devices are configured in high-availability pair, and the outbound traffic is load balanced between two internet service providers (ISPs), however, the failover is NOT happening correctly. The following requirements were discussed during the design requirement phase:
* The return traffic for a specific flow should be routed through the same path while using Link Load Balancing.
* The link should fail over even if the ISP router is up and intermediary devices to an ISP router are down.
* Traffic going through one ISP router should fail over to the secondary ISP, and the traffic should not flow through both routers simultaneously.
What should the architect configure with Link Load Balancing LLB) to meet the requirement?
- A. Reverse NAT.
- B. Destination IP hash load balancing method
- C. Inverse NAT
- D. Least packets load balancing method
Answer: A
NEW QUESTION # 82
Scenario: A Citrix Architect needs to deploy three VPX instances on NetScaler SDX 11500 device to meet the following design requirements:
* Three (3) VPX instances must be provisioned on the SDX device.
* Instance 1 must be utilized for deploying NetScaler Gateway virtual server.
* Instance 2 must be utilized for deploying load balancing virtual servers for XML, Director, StoreFront, and Active Directory servers.
* Separate IP address must be utilized for the communication with XenApp environment and LDAP communication.
* Instance 3 must be used for deploying the test environment.
* In the test environment, NetScaler Gateway virtual server, load balancing virtual servers for XML, Director, StoreFront and Active Directory servers must be configured.
How many IP addresses will be required to meet these design requirements?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 83
A Citrix Architect needs to make sure that maximum concurrent AAA user sessions are limited to 4000 as a security restriction.
Which authentication setting can the architect utilize to view the current configuration?
- A. Active User Session
- B. Global Session Settings
- C. AAA Parameters
- D. AAA Virtual Server
Answer: B
Explanation:
Explanation/Reference: https://www.carlstalhood.com/category/netscaler/netscaler-11-1/netscaler-gateway-11-1/
NEW QUESTION # 84
Scenario: A Citrix Architect has configured two MPX devices in high availability mode with version
12.0.53.13 nc. After a discussion with the security teamf the architect enabled the Application Firewall feature for additional protection. In the initial deployment phase, the following security features were enabled:
* IP address reputation
* HTML SQL injection check
* Start URL
* HTML Cross-site scripting
* Form-Field consistency
After deployment in pre-production, the team identifies the following additional security features and changes as further requirements:
* Application Firewall should retain the response of form field in its memory. When a client submits the form in the next request Application Firewall should check for inconsistency in the request before sending it to the web server.
* All the requests dropped by Application Firewall should get a pre-configured HTML error page with appropriate information.
* The Application Firewall profile should be able to handle the data from an RSS feed and an ATOM-based site. Click the Exhibit button to view an excerpt of the existing configuration.
What should the architect do to meet these requirements?
- A. Modify existing profile settings and change HTML settings to use an HTML error object.
- B. Modify existing profile settings and disable the setting 'Enable Form Tagging'.
- C. Modify existing profile settings, change HTML settings, and ensure to exclude uploaded files from securiry chec<s.
- D. Create a new basic profile and use pre-existing HTML settings.
Answer: A
NEW QUESTION # 85
Scenario: A Citrix Architect needs to assess an existing NetScaler configuration. The customer recently found that members of certain administrator groups were receiving permissions on the production NetScaler appliances that do NOT align with the designed security requirements.
Click the Exhibit button to view the configured command policies for the production NetScaler deployment.
To align the command policy configuration with the security requirements of the organization, the _______ for ______should change. (Choose the correct option to complete the sentence.)
- A. priority; Item 5
- B. action; Item 4
- C. command spec; Item 6
- D. action; Item 1
- E. command spec; item 3
- F. priority; Item 2
Answer: F
NEW QUESTION # 86
Scenario: A Citrix Architect has implemented two high availability pairs of MPX 5500 and MPX 11500 devices respectively with 12.0.53.13 nc version. The NetScaler devices are set up to handle NetScaler Gateway, Load Balancing, Application Firewall, and Content Switching. The Workspacelab infrastructure is set up to be monitored with NMAS version 12.0.53.13 nc by the Workspacelab administrators. The Workspacelab team wants to implement one more pair of NetScaler MPX 7500 devices with version
12.0.53.13 nc.
The Citrix consulting team has assigned the task to implement these NetScaler devices in the infrastructure and set them up to be monitored and managed by NMAS.
The following are the requirements that were discussed during the project initiation call:
* NMAS should be configured to get the infrastructure information under sections such as HDX Insight, WEB Insight, and Security Insight.
* Configuration on the new MPX devices should be identical to MPX 11500 devices.
* Configuration changes after the deployment and initial setup should be optimized using NMAS.
* NMAS should be utilized to configure templates that can be utilized by the Workspacelab team in future deployment.
* As per the requirement from the Workspacelab team, NMAS should be store the audited data for only
15 days.
Which process should the architect utilize to ensure that the deployment of MPX 11500 devices are optimized and that it is correct, before deploying the devices in production?
- A. Under Stylebooks; Public and composite stylebook templates should be utilized prior to deployment.
- B. Under Configuration jobs; Configuration Audit and Advice should be used prior to deployment.
- C. Under Stylebooks; Inbuilt and composite stylebook templates should be utilized prior to deployment.
- D. Under Configuration Management; Configuration Audit and Advice should be used prior to deployment.
Answer: D
NEW QUESTION # 87
Scenario: A Citrix Architect needs to design a hybrid XenApp and XenApp and XenDesktop environment which will include Citrix Cloud as well as resource locations in on-premises datacenter and Microsoft Azure.
Organizational details and requirements are as follows:
* Active XenApp and XenDesktop Service subscription
* No existing NetScaler deployment
* About 3,000 remote users are expected to regularly access the environment
* Multi-factor authentication should be used for all external connections
* Solution must provide load balancing for backend application servers
* Load-balancing services must be in Location B
Click the Exhibit button to view the conceptual environment architecture.
The architect should use ________ in Location A, and should use _________ in Location B.
(Choose the correct option to complete the sentence.)
- A. Citrix Gateway as a Service, Citrix ADC (BYO)
- B. Citrix Gateway as a Service, Citrix ICA Proxy (cloud-licensed)
- C. Citrix Gateway as a Service, no NetScaler products
- D. No Citrix products, Citrix ICA Proxy (cloud-licensed)
- E. No Citrix products, Citrix ADC (BYO)
- F. No Citrix products; Citrix Gateway appliance
Answer: A
NEW QUESTION # 88
Scenario: A Citrix Architect needs to assess an existing NetScaler configuration. The customer recently found that certain user groups were receiving access to an internal web server with an authorization configuration that does NOT align with the designed security requirements.
Click the Exhibit button view the configured authorization settings for the web server.
Which item should the architect change or remove to align the authorization configuration with the security requirements of the organization?
- A. Item 4
- B. Item 5
- C. Item 3
- D. Item 2
- E. Item 1
Answer: B
NEW QUESTION # 89
Which four load-balancing methods support NetScaler Virtual Server-Level Slow Start? (Choose four.)
- A. Token
- B. Least Packets
- C. SRCIPSRCPORTHash
- D. Least Connection
- E. URLHash
- F. Least bandwidth
- G. Least response time
Answer: B,D,F,G
Explanation:
Explanation/Reference: https://support.citrix.com/article/CTX108886
NEW QUESTION # 90
......
2024 Valid 1Y0-440 test answers & Citrix Exam PDF: https://examcollection.realvce.com/1Y0-440-original-questions.html