[2024] Valid 300-730 test answers & Cisco 300-730 exam pdf
Verified 300-730 dumps Q&As - Pass Guarantee or Full Refund
Cisco 300-730 exam is an important certification exam for network security professionals who want to specialize in VPN and secure remote access solutions using Cisco technologies. Passing 300-730 exam validates the candidate's knowledge and skills in implementing and managing VPN solutions for secure remote access to enterprise networks. The CCNP Security certification track is highly valued in the IT industry and is recognized by leading companies worldwide, making the Cisco 300-730 exam a valuable investment for IT professionals.
NEW QUESTION # 80
Refer to the exhibit. An IPsec Cisco AnyConnect client is failing to connect and generates these debugs every time a connection to an IOS headend is attempted. Which action resolves this issue?
- A. Correct the DH group setting.
- B. Correct the integrity setting.
- C. Correct the encryption setting.
- D. Correct the PFS setting.
Answer: A
NEW QUESTION # 81
A network engineer must implement an SSLVPN Cisco AnyConnect solution that supports 500 concurrent users, ensures all traffic from the client passes through the ASA, and allows users to access all devices on the inside interface subnet (192.168.0.0/24). Assuming all other configuration is set up appropriately, which configuration implements this solution?
- A.
- B.
- C.
- D.
Answer: B
Explanation:
First, tunnel all to ensure all traffic is passing through ASA (so answer is A or D). second, we need 500 users so the Pool in D is not ensuring this requirement (only 254 ip) so Answer is A.
NEW QUESTION # 82
Refer to the exhibit.
An IKEv2 site-to-site tunnel between an ASA and a remote peer is not building successfully. What will fix the problem based on the debug output?
- A. Install the correct certificate to validate the peer.
- B. Specify the peer IP address in the tunnel group name.
- C. Correct crypto access list on both VPN devices.
- D. Ensure crypto IPsec policy matches on both VPN devices.
Answer: C
Explanation:
To fix the problem with the IKEv2 site-to-site tunnel between an ASA and a remote peer based on the debug output, you should ensure that the crypto IPsec policy matches on both VPN devices. The debug output indicates that the crypto policies on the two VPN devices are mismatched, which is preventing the tunnel from building successfully. Installing the correct certificate to validate the peer, correcting the crypto access list on both VPN devices, and specifying the peer IP address in the tunnel group name will not fix the problem.
NEW QUESTION # 83
Which two commands help determine why the NHRP registration process is not being completed even after the IPsec tunnel is up? (Choose two.)
- A. show dmvpn detail
- B. show crypto isakmp sa
- C. show crypto ipsec sa
- D. show ip traffic
- E. show ip nhrp traffic
Answer: B,E
Explanation:
https://www.cisco.com/c/en/us/support/docs/security/dynamic-multipoint-vpn-dmvpn/111976-dmvpn-troubleshoot-00.html
NEW QUESTION # 84
Which VPN technology must be used to ensure that routers are able to dynamically form connections with each other rather than sending traffic through a hub and be able to advertise routes without the use of a dynamic routing protocol?
- A. DMVPN Phase 3
- B. GETVPN
- C. DMVPN Phase 2
- D. FlexVPN
Answer: B
NEW QUESTION # 85
Refer to the exhibit. Which type of VPN is used?
- A. Cisco AnyConnect SSL VPN
- B. clientless SSL VPN
- C. Cisco Easy VPN
- D. GETVPN
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/asa/asa97/configuration/vpn/asa-97-vpn- config/vpn-easyvpn.html
NEW QUESTION # 86
Refer to the exhibit.
An engineer is diagnosing an issue that occurred after a router at a branch site was assigned a new address. Based on the debugs, what must be done to resolve this issue?
- A. Add the remote peer's IP address to the server's IKEv2 keyring.
- B. Ensure that the UDP 500 packets between devices are not dropped.
- C. Ensure that the correct preshared keys are set on both sides.
- D. Add the remote peer's identity to the server's IKEv2 profile.
Answer: D
NEW QUESTION # 87
Cisco AnyConnect Secure Mobility Client has been configured to use IKEv2 for one group of users and SSL for another group. When the administrator configures a new AnyConnect release on the Cisco ASA, the IKEv2 users cannot download it automatically when they connect. What might be the problem?
- A. Client services are not enabled.
- B. The XML profile is not configured correctly for the affected users.
- C. The new client image does not use the same major release as the current one.
- D. Client software updates are not supported with IKEv2.
Answer: A
Explanation:
On ASDM, under connection profile -> access interfaces -> IPSEC (IKEv2) Access : you can check or uncheck the boxes for "allow access" and "enable client access".
NEW QUESTION # 88
Refer to the exhibit.
A network administrator is setting up a phone VPN on a Cisco ASA. The phone cannot connect and the error is presented in a debug on the Cisco ASA. Which action fixes this issue?
- A. Install the posture module on the Cisco ASA.
- B. Configure the Cisco ASA to present an RSA certificate to the phone for authentication.
- C. Disable Cisco Secure Desktop under the connection profile VPNPhone.
- D. Enable web-deploy of the posture module so that the module can be downloaded from the Cisco ASA to an IP phone.
Answer: C
Explanation:
CSD and IP phones: Currently, IP phones do not support Cisco Secure Desktop (CSD) and do not connect when CSD is enabled for the tunnel group or globally in the ASA.
NEW QUESTION # 89
An organization wants to distribute remote access VPN load across 12 VPN headend locations supporting 25,000 simultaneous users. Which load balancing method meets this requirement?
- A. DNS-based load balancing
- B. AnyConnect native load balancing
- C. equal cost, multipath load balancing
- D. one VPN profile per site
Answer: A
NEW QUESTION # 90
A network engineer must expand a company's Cisco AnyConnect solution. Currently, a Cisco ASA is set up in North America and another will be installed in Europe with a different IP address. Users should connect to the ASA that has the lowest Round Trip Time from their network location as measured by the AnyConnect client. Which solution must be implemented to meet this requirement?
- A. Optimal Gateway Selection
- B. DNS Load Balancing
- C. VPN Load Balancing
- D. IP SLA
Answer: A
Explanation:
Optimal Gateway Selection (OGS). OGS is a feature that can be used in order to determine which gateway has the lowest Round Trip Time (RTT) and connect to that gateway. One can use the OGS feature in order to minimize latency for Internet traffic without user intervention. With OGS, Cisco AnyConnect Secure Mobility Client (AnyConnect) identifies and selects which secure gateway is best for connection or reconnection. OGS begins upon first connection or upon a reconnection at least four hours after the previous disconnection.
NEW QUESTION # 91
Refer to the exhibit.
All internal clients behind the ASA are port address translated to the public outside interface that has an IP address of 3.3.3.3. Client 1 and client 2 have established successful SSL VPN connections to the ASA. What must be implemented so that "3.3.3.3" is returned from a browser search on the IP address?
- A. Same-security-traffic permit inter-interface under Group Policy
- B. Tunnel All Networks under Group Policy
- C. Exclude Network List Below under Group Policy
- D. Tunnel Network List Below under Group Policy
Answer: B
Explanation:
The reason is that by default, the SSL VPN clients use split tunneling, which means they only send traffic destined for the corporate network through the VPN tunnel, and use their local gateway for other traffic, such as browsing the internet. This means that when they search for their IP address on a browser, they will see their local IP address, not the IP address of the ASA.
To change this behavior, you need to configure the Group Policy on the ASA to tunnel all networks, which means that all traffic from the SSL VPN clients will go through the VPN tunnel, regardless of the destination. This way, when they search for their IP address on a browser, they will see the IP address of the ASA, which is 3.3.3.3.
To configure tunnel all networks under Group Policy, you can use either ASDM or CLI. For example, using ASDM, you can follow these steps1:
Choose Configuration > Remote Access VPN > Network (Client) Access > Group Policies.
Select the group policy that you want to modify and click Edit.
In the Edit Internal Group Policy window, choose Advanced > Split Tunneling.
In the Policy drop-down list, choose Tunnel All Networks.
Click OK and then Apply.
Using CLI, you can enter these commands:
ciscoasa(config)# group-policy <group_policy_name> attributes ciscoasa(config-group-policy)# split-tunnel-policy tunnelall
NEW QUESTION # 92
Refer to the exhibit.
An IKEv2 site-to-site tunnel between an ASA and a remote peer is not building successfully. What will fix the problem based on the debug output?
- A. Install the correct certificate to validate the peer.
- B. Specify the peer IP address in the tunnel group name.
- C. Correct crypto access list on both VPN devices.
- D. Ensure crypto IPsec policy matches on both VPN devices.
Answer: D
NEW QUESTION # 93
Which VPN solution uses TBAR?
- A. VTI
- B. DMVPN
- C. Cisco AnyConnect
- D. GETVPN
Answer: D
NEW QUESTION # 94
An administrator is setting up AnyConnect for the first time for a few users. Currently, the router does not have access to a RADIUS server. Which AnyConnect protocol must be used to allow users to authenticate?
- A. EAP-AnyConnect
- B. EAP-MD5
- C. EAP-MSCHAPv2
- D. EAP-GTC
Answer: A
NEW QUESTION # 95
Which requirement is needed to use local authentication for Cisco AnyConnect Secure Mobility Clients that connect to a FlexVPN server?
- A. use of certificates instead of username and password
- B. EAP-AnyConnect
- C. AnyConnect profile
- D. EAP query-identity
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/security/flexvpn/200555-FlexVPN-AnyConnect-IKEv2- Remote-Access.html
NEW QUESTION # 96
Drag and drop the code snippets from the right onto the blanks in the configuration to implement FlexVPN. Not all snippets are used.
Answer:
Explanation:
NEW QUESTION # 97
Which Cisco AnyConnect component ensures that devices in a specific internal subnet are only accessible using port 443?
- A. split tunnel
- B. WebACL
- C. VPN filter
- D. routing
Answer: C
NEW QUESTION # 98
......
Cisco 300-730 exam is designed for professionals who want to validate their skills in implementing secure solutions with virtual private networks (VPNs). 300-730 exam tests the candidate's knowledge of the VPN technologies, including remote access VPN, site-to-site VPN, and AnyConnect SSL VPN. It also covers the implementation of secure communication protocols, such as IPsec, SSL/TLS, and DTLS, and their integration with other security technologies, such as firewalls, intrusion prevention systems, and endpoint security.
Besides benefiting from skills you acquire during training, the course also provides a chance to gain 40 CE units, which are used for recertification. Once you have completed it, you will know that you are exam ready and you are able to meet the following objectives:
- You can make use of options for remote access VPNs on Cisco router in addition to firewalls
- You have a thorough knowledge of the site-to-site as well as remote access VPN designs
- You can use the site-to-site VPN options that are present on Cisco router as well as firewalls
- You can troubleshoot varied VPN options present on a router as well as firewalls for Cisco
Once you feel your understanding of the above areas is deep, you can proceed to taking 300-730 exam. However, not all this knowledge can be gained from one source. It is important to complement the course with other relevant study materials like study guides.
300-730 Exam Questions – Valid 300-730 Dumps Pdf: https://examcollection.realvce.com/300-730-original-questions.html